14mm 90 Degree Diffused Ash Catcher | Ultimate Beaker Bong Design

Keep more ash and debris out of your main piece with the Billy Mate 14mm 90 Degree Diffused Ash Catcher, made from thick borosilicate glass with a built-in diffused downstem for an additional stage of water filtration.

Designed for compatible 14mm female joints, this 90 degree ash catcher sits between your cone piece and bong, helping collect ash before it reaches the main water chamber.

Add a small amount of water and the internal diffuser provides extra bubbling and filtration while helping keep your main bong cleaner for longer.

The main job of an ash catcher is simple: catch ash and debris before it enters your bong.

Instead of loose material travelling directly into the main chamber, much of it is collected inside the ash catcher first.

This can help:

• Reduce ash entering the main bong
• Reduce debris in the main water chamber
• Keep bong water cleaner for longer
• Reduce residue buildup inside the main piece
• Make regular bong maintenance easier
• Add another removable filtration section to your setup

It is particularly useful if you prefer keeping your main glass looking clean between full washes.

Inside the chamber is a built-in diffused downstem designed to break the airflow into smaller streams as it passes through the water.

This creates additional bubbling before the airflow enters your main bong.

Benefits include:

• Additional water diffusion
• Increased bubble production
• More contact between airflow and water
• Smoother airflow through the accessory
• Extra filtration before reaching the main chamber

This is a wet ash catcher, meaning it can be used with a small amount of water.

The internal diffuser sits inside the ash catcher chamber and works as an additional mini water filtration stage.

Do not overfill the chamber. Only a small amount of water is generally required to cover the diffuser openings.

The 90 degree design is intended for compatible bongs with an upright or near-horizontal joint configuration.

The positioning keeps the ash catcher sitting upright when installed on the appropriate piece.

Always check the angle of your bong joint before purchasing, as 45 degree and 90 degree ash catchers are designed for different setups.

This Billy Mate ash catcher uses a 14mm connection.

The lower male joint is designed to fit compatible 14mm female bong joints, while the upper joint accepts a compatible 14mm cone piece.

Joint Details

• Joint Size: 14mm
• Angle: 90 degree
• Bottom Connection: Male
• Designed For: Compatible 14mm female bong joints
• Upper Connection: 14mm female
• Accepts compatible 14mm male cone pieces

Always confirm both the joint size and angle of your bong before ordering.

The ash catcher is constructed from thick borosilicate glass, giving it a solid feel while keeping the internal chamber and diffuser visible.

Borosilicate glass is commonly used for quality glass accessories because of its durability and resistance to normal temperature changes.

One of the biggest advantages of an ash catcher is that it is a separate removable component.

You can take it off your bong for:

• Cleaning
• Water changes
• Storage
• Replacement
• Using the bong without the ash catcher when preferred

This can also make routine maintenance easier because much of the heavier residue can collect inside the removable accessory rather than deeper inside the main bong.

• Brand: Billy Mate
• Product: Diffused Ash Catcher
• Joint Size: 14mm
• Angle: 90 degree
• Bottom Joint: 14mm male
• Upper Joint: 14mm female
• Fits: Compatible 14mm female bong joints
• Material: Thick borosilicate glass
• Type: Wet ash catcher
• Diffusion: Built-in diffused downstem
• Water Use: Yes
• Design: Removable glass accessory
• Branding: Billy Mate

Billy Mate offers both wet and dry ash catcher designs.

Wet Ash Catcher

A wet ash catcher, like this model, uses a small amount of water and an internal diffuser.

It provides:

• Ash collection
• Additional water filtration
• Extra bubbling
• Additional cooling and diffusion

Dry Ash Catcher

A dry ash catcher is normally used without water and is primarily designed to catch ash and debris.

It generally offers:

• Simpler cleaning
• Less overall weight
• Less water resistance
• No additional water diffusion

Choose the wet diffused ash catcher when you want ash collection plus another filtration stage.

Choose a dry ash catcher when your main priority is keeping debris out of your bong with the simplest possible setup.

This accessory gives you more than simple ash collection.

You get:

• 14mm joint
• 90 degree configuration
• Built-in diffused downstem
• Additional water filtration
• Helps keep your main bong cleaner
• Thick borosilicate glass
• Removable design
• Easy access for cleaning
• Genuine Billy Mate styling

A small addition to your setup can make a noticeable difference to how much debris ends up inside your main piece.